HOW TO RECOVER DELETED FILES FROM A HARD DRIVE

Are you feeling incapable of retrieving the deleted files from your hard disk? At that time a number of questions raised in your mind like what we have to do? and How can we get them back? Don’t hesitate. We are here to help you. To keep an end for the questions you just have to follow the below steps and simply resolve your problem.
This tutorial is all about how to use Diskdigger to recover deleted files from your hard drive. Unfortunately, you might lose some important files by deleting or by reformatting the drive entirely, DiskDigger will assist you in recovering many of your lost files.
Note: For recovering photos specifically, please refer to the tutorial on recovering photos. 
Starṭ your journey by installing DiskDigger. After that, you should check whether your hard drive is in the list of drives available for scanning. Select the drive and click “Next”.

Note:

If the hard drive does not appear in the list of drives to scan, make sure it’s plugged in properly and click the “Refresh list” button. If the drive still does not appear in the list, try plugging it into a different port. And if it still does not appear in the list, it may indicate that the drive has a physical error and may no longer be recoverable.
DiskDigger will allow you to select between the Dig Deep andDig Deeper modes. If you are files are deleted recently or no other data was written to the drive after they were deleted you should have to try Dig Deep first. We can always go back and rescan with Dig Deeper if Dig Deep is unsuccessful.
After selecting Dig Deep and clicking next, DiskDigger will scan your drive when it finishes you can see a list of recoverable files.
You might also like:      MAKING ISO IMAGES USING DISKDIGGER
                                                  
  • Click the drop-down box next to “Show these file types” and select the types of files you want to see.
  • Sort the files by last-modified date by clicking the “Date modified” column header. This enables the most recently modified files to the top of the list.
  • Click the “Filter results” button, where you can specify a portion of the file name to search for, as well as minimum and maximum file size.

Also, try the “Status” Column which is next to each file in the list: it shows whether each file is recoverable, overwritten or unknown.

  • If the status is “recoverable,” then the file is likely intact and can be recovered successfully.
  • If the status is “overwritten,” then the file is probably no longer recoverable using this method. Its contents have been overwritten by new data, or the filesystem indices that were pointing to this file have been reallocated. You may try going back and rescanning the drive with Dig Deeper mode.
  • If the status is “unknown,” it means that DiskDigger is unable to verify whether this file is fully intact. You may need to recover the file and open it manually to see if its contents are correct.

If you notice the files which you want to retrieve in the list, then select them and tap the “Recover selected files” button. DiskDigger will allow you to select the folder into which the recoverable files will be saved.

 

 

However, if you do not see the files you’re looking for, you may go back by clicking the Back button until you reach the selection of Deep and Deeper mode, and proceed with selecting Dig Deeper and tapping Next. The program will now allow you to select the types of files you want to recover. By default, all file types are selected, but you may select only the specific types of files you’d like to search for. (It’s OK to leave all the file types selected. When DiskDigger shows us the list of recoverable files, they will be grouped by file type.)

 

When the DiskDigger starts scanning the hard drive you can notice the recovered files in the list on the left corner. At this point, you can select which files you’d like to recover and save them from the hard drive to a different location.

You can select which files you’d like to recover in the same way you would select multiple files in Windows Explorer: you can click and drag a selection around the files you want to save; you can also hold down the Ctrl key and click on individual files to include them in the selection. If you just want to select all the files, you can right-click within the list, and choose “Select All.
After choosing the files, tap on the “Recover Selected Files” button at the top corner. Besides, it will take you to the new location where the recovered files have to be saved. In this example, I’ll simply select the top-most “Desktop” folder on my computer.

Note:

Do not save the recoverable files to the same drive as the one you’re recovering from! This risks overwriting some of the very files you’re about to recover.
DiskDigger will permit you to save the files from the hard drive to the new location 
After completing the saving process, it will automatically open the folder into which the files were saved. That folder is named as “Recovered” and will be inside the folder that you selected for saving the files. Subsequently, you can close the DiskDigger when the recovery is completed.
Hey, guys, you came to the end of this article, hope you like it. 
For any queries related to this post please feel free to comment. 

Making ISO images using DiskDigger || ISO image Creator

Are you aware of creating ISO image by using DISKDIGGER, Aren’t you?  Then have a glimpse at our article. The article is all about creating an ISO file from any CD or DVD. An ISO file is a copy content of an optical disk like a CD or DVD. If you want to back up the disk’s contents simple you can make ISO disk image. After a while, you can burn the ISO file you created onto a new disk, which will become a facsimile of the original one. 

HERE’S HOW TO CREATE AN ISO FILE USING DISKDIGGER || ISO Image Creator

  • Insert the CD or DVD disk from which you would like to create the ISO file. Then launch DiskDigger pro, select the CD/DVD drive into which you inserted the disk, and click “Next”.

Generally, DiskDigger permits you to select between “dig deep” and “dig deeper” modes. However, since CDs and DVDs don’t have partitions recognized by DiskDigger, it will only allow you to select “dig deeper” mode, so click “Next” again.

When the DiskDigger starts scanning the disk, the file which is found for the first time is ISO file that represents the contents of the disk. After finding the ISO file you can click on the “pause” button to stop scanning. 

For saving the ISO file, first, you should have to select it and click the “Save Selected Files” button at the top. Next, you have to select the location where you want to save. 

Disk Digger Pro will take a while for saving the ISO file. After that, you can navigate to the directory you specified for saving the file, and check it whether the file is there or not.  

Click the following button to download Making ISO FILES USING DISKDIGGER now.

 

Download APK

 

For More Interested Stuff Click here :

DiskDigger in Linux

Download DiskDigger || DiskDigger

RUNNING DISKDIGGER IN MAC OS

 

Thanks for visiting hope you like it.

How DiskDigger works || DiskDigger Pro

How DiskDigger works || DiskDigger Pro

Unexpectedly, anyone lost his/her files from Android phone or PC etc then immediately they might get a doubt how to recover deleted files from external hard drive?. In this case, everyone follows a different procedure. But choosing the right tool will certainly recover the lost files. Anyhow, I hope you’re the luckiest person for choosing our platform to get back your deleted files and surely this article will help you a lot.  Simply go through DiskDigger Pro.

What is DiskDigger? And How DiskDigger works?

DiskDigger is a free data recovery software which helps to recover lost files, photos from your memory card and or internal memory without rooting process.

How DiskDigger Works? 

DiskDigger has two methods which you have to choose every time while scanning a disk. These methods are named as “dig deep” and “dig deeper“.

Now Let’s See How Diskdigger Works: 

Digging Deep: 

The “Dig Deep” advice DiskDiggerundelete” files from the file system on your disk. Suppose, under many file system, when you delete a file, it doesn’t get wiped from the disk. However, the file system will simply mark the deleted file and will not display you the file when you browse the contents of the disk. DiskDigger scans the file system for deleted files, display them to you, and allow you to bring them back as normal files again.

To implement this process we have several limitations. First step1: Diskdigger has to be “aware” of which type of file system present in the disk. To get knowledge of those files follows the below steps.

FAT — Used on floppy disks (FAT12), most USB flash drives and memory cards under 4 gigabytes, and older hard disks (FAT16).
FAT32 — Used on slightly older hard disks and most USB flash drives and memory cards with 4 gigabytes or greater.
NTFS — Used on most modern hard disks.
exFAT — Used on some modern hard disks and high-capacity memory cards and USB drives.

Luckily, the above list of file systems covers the wide majority of the world’s users, so this limitation is trivial compared to the next one.

After a file deleted, the file system is completely free to overwrite the contents of the deleted file with new data. From the perspective of the file system, the deleted file is currently as good as free space, prepared for the taking. The following file that is saved by the file system may simply be written on top of the deleted one. If it happens,  the deleted record will really be lost forever.

So, the rule would be like this: The undelete procedure is effective only for the file that has been removed very recently. Or on the other hand, more exactly: The likelihood of effectively retrieving a file is inversely corresponding to the amount of time passed in the wake of deleting it.

Digging deeper:

The “dig deeper” mode causes DiskDigger Pro became a  powerful information carver, and carve out whatever file it can discover on the disk, free of the record framework. Information cutting alludes to physically scanning each and every area on the disk, and searching for hints of known file types.

Pros And Cons:

This method has some pros and cons. The main pro is that it’s independent of the file system that’s on the disk, so the disk can be formatted as FAT, NTFS, HFS, ext2, or anything else; it doesn’t matter. DiskDigger scans “underneath” the file system, which gives it an added pro of being able to scan any free space on the disk outside of the file system, which the “dig deep” mode cannot do.

The main con of digging deeper is, it takes more time for scanning. If you’re scanning a memory card or USB drive, it shouldn’t be too bad, but if you’re scanning an entire hard drive, be prepared for a several-hour job.  Of course, the burden of the time spent on the scan is subjective and depends on the value of the files you’re trying to recover.

And one more con of this method is only a limited number of file types can be recovered. Since we’re not aware of the file system, we have no way of knowing what types of files are present, so the only thing we have to go on are the actual bytes that we see on the disk. This means DiskDigger must know about the structure of the file type we have to recover lost files and search for examples of bytes explicit to each file format. Luckily, DiskDigger supports a genuinely wide variety of document types which should cover most cases.

Last but not least, one more con of this process is that it’s not possible to recover files that have been fragmented by the file system.  Since it’s not aware of the file system, DiskDigger has no way of knowing whether or not a certain file has been fragmented. So, technically, when digging deeper, DiskDigger will just recover the main fragment of a file. Most files comprise of a single fragment anyway, but in some cases, the file system will choose to split a file into two or more fragments. A standard guideline is:  the bigger file is, the more likely it is that it’s been fragmented. I hope data recovery software helps you a lot. To retrieve the data from different devices go through our site to recover lost files.

Also Read:

 Running in Linux

backup and restore Android apps and data

 

Download APK

Importance Of DiskDigger And # DiskDigger Features

Hi Guys, today I am going to share about DiskDigger which helps you to get back the lost files from the hard drive in your device. Unfortunately, sometimes inadvertently you may delete a wanted pics or files in place of another pics or files. So to prevent this issue please install DiskDigger on where you need. In details, DiskDigger is a tool that undeletes and retrieves the missed documents from the drive, memory card, USB Flash Drives, CDs, and DVDs. Indeed, the presence of Diskdigger on your phone is not compulsory but, if it is rooted in your device you can recover deleted photos, files etc. (Note: DiskDigger cannot retrieve data directly from Android or iOS devices plugged into a USB port on your PC. To recover data from an Android device, please use the DiskDigger App for Android. And if your Android device uses a microSD card for storing the data, please remove the card and connect it directly to your PC using a card reader, so that you can scan it directly using DiskDigger for Windows.) Moreover, It contains two modes of operations which can select every time you scan a disk. And these modes are named as “dig deep” and “dig deeper”. Here we’re providing the features of each mode.

Download APK

Dig Deep

  • Undelete files from FAT (FAT12, FAT16, FAT32), NTFS, and exFAT partitions.
  • Recover any type of file.
  • Filter recoverable files by name and size.
  • Sort recoverable files by name, size, date, and directory.

Dig Deeper

  • Scan (carve) entire disk for traces of specific file types.
  • Supported file types include:
    • Photos and images:

      • JPG – Pictures stored in digital cameras and on the Web (Joint Photographic Experts Group)
      • PNG – Portable Network Graphics
      • GIF – Graphics Interchange Format
      • BMP – Windows and OS/2 bitmap image
      • TIFF – Tagged Image File Format
      • ICO – Windows Icon
      • ANI – Windows animated cursor
      • CR2 – Canon raw image
      • SR2 – Sony raw image
      • NEF – Nikon raw image
      • DCR – Kodak raw image
      • PEF – Pentax raw image
      • RAF – Fujifilm raw image
      • RW2 – Panasonic/Lumix raw image
      • LFP – Lytro raw image
      • MPO – Images from 3D cameras (Multiple Picture Object)
      • DNG – Adobe Digital Negative
      • SVG – Scalable Vector Graphics
      • HEIC/HEIF – High-Efficiency File Format image
      • PSD – Adobe Photoshop image
      • RAS – Sun raster image
      • PSP – Paint Shop Pro image
      • Thumbcache – Windows thumbnail cache
      • IFF – Amiga images and other media
      • ART – AOL Art images
      • WMF – Windows MetaFile
      • EMF – Enhanced MetaFile
      • WMZ, EMZ – Compressed MetaFiles
      • DICOM – Medical imaging format
      • WEBP – WebP images
      • PCX – ZSoft PCX images
      • CDR – CorelDraw images
      • INDD – Adobe InDesign documents
      • CP – Adobe Captivate documents
      • AI – Adobe Illustrator documents
    • Documents:

      • DOC – Microsoft Word document (2003 and below)
      • DOCX – Microsoft Word document (2007 and above)
      • XLS – Microsoft Excel spreadsheet (2003 and below)
      • XLSX – Microsoft Excel spreadsheet (2007 and above)
      • PPT – Microsoft PowerPoint presentation (2003 and below)
      • PPTX – Microsoft PowerPoint presentation (2007 and above)
      • VSD – Microsoft Visio document
      • PDF – Portable Document Format
      • XML – eXtensible Markup Language
      • HTML – HyperText Markup Language
      • RTF – Rich Text Format
      • WPD – WordPerfect document
      • WPS – Microsoft Works document
      • PUB – Microsoft Publisher document
      • XPS – XML Paper Specification
      • WRI – Old Windows Write document
      • ODT, ODS, ODP, ODG – OpenDocument formats
      • DPP – Serif DrawPlus document
      • PPP – Serif PagePlus document
    • Audio and video:

      • MP3 – Audio format widely used in digital media players (MPEG layer 3)
      • WMA – Windows Media Audio
      • AVI – Audio Video Interleave
      • WAV – Wave audio
      • MIDI -Musical Instrument Digital Interface
      • FLV – Adobe Flash Video
      • WMV – Windows Media Video
      • MOV – QuickTime video
      • M4A – MPEG-4 audio
      • M4V, MP4 – MPEG-4 video
      • 3GP – Third Generation Partnership video
      • F4V – Adobe Flash video based on MPEG-4 Part 12
      • RM – RealMedia video
      • RMVB – RealMedia video (variable bitrate)
      • MKV –  Matroska  video
      • MPEG – Motion Picture Experts Group
      • AU – Sun Microsystems audio
      • MTS, M2TS – MPEG2 Transport Stream
      • R3D – RED Video Camera video
      • APE – Monkey’s Audio file
      • OFR – OptimFROG lossless audio
      • PPM, PGM, PBM – Netpbm images
      • WebM – WebM videos
    • Compressed archives:

      • ZIP – Widely used a compressed format developed by PKWARE
      • RAR – Roshal ARchive, used by WinRAR
      • 7Z – Compressed format used by 7-Zip
      • GZ – Compressed format used by gZip
      • SIT – Compressed format used by Stuffit for Mac
      • ACE – WinAce archive
      • CAB – Microsoft Cabinet archive
      • SZDD – Compressed files created by COMPRESS.EXE from MS-DOS
    • Miscellaneous:

      • ISO – Images of optical media, such as CDs and DVDs
      • EXE – Windows or MS-DOS executable file
      • DLL – Windows or MS-DOS dynamic-link library
      • MDB – Microsoft Access database (2003 and below)
      • ACCDB – Microsoft Access database (2007 and above)
      • PST – Microsoft Outlook Personal Folders file
      • DBX – Microsoft Outlook Express data file
      • XAC – GnuCash data file
      • KMY – KMyMoney data file
      • DWG – AutoCAD drawing
      • DXF – Drawing Interchange Format
      • CHM – Microsoft Compiled HTML Help file
      • TTF, TTC – TrueType font
      • CLASS – Java class file
      • KMZ – Google Earth location data
      • FIT – Garmin activity file
      • WALLET – an Armory Bitcoin wallet
      • WALLET.DAT – Bitcoin Core wallet

Download APK

Common Features

  • Works in Windows 10, Windows 8, Windows 7, Windows Vista, and Windows XP.  Both 32-bit and 64-bit versions of Windows are supported.
  • Also works in Linux.
  • View recoverable files as a list, or as thumbnail previews.
  • Thumbnails will show previews of image files, album art from MP3 and WMA files, and icons from executable files!
  • Selecting a recoverable file brings up a full preview of the file (insofar as possible). For image files, it will show the image (with pan and zoom). Document files, it will show a text-only preview of the document. For certain audio files, it will allow you to play back the sound.
  • The Previews of JPG and TIFF files will show EXIF information (camera model, the date is taken, sensor settings, etc.).
  • Previews of MP3 files will show ID3 information (artist, album, genre, etc.).
  • Previews of ZIP files will show a list of files contained in the archive.

Advanced Features

  • Able to scan virtual disk image files:
    • E01 and EWF files (Expert Witness Format)
    • VMDK files (VMware disk image)
    • VHD files (Microsoft Virtual Hard Disk)
    • VDI files (VirtualBox disk image)
    • Direct binary disk images (acquired with <code>dd</code> or similar tools)
  • When digging deeper, ability to start scanning from a specific location on the disk.
  • When previewing files, the program optionally shows the first 4K bytes of the file as a hex dump.

Download APK