USB DATA RECOVERY | RECOVER FILES FROM FLASH DRIVE

USB DATA RECOVERY | RECOVER FILES FROM FLASH DRIVE

Are you searching for the best data recovery services? If yes, keep reading this article for what you are searching for. I hope our site will make you hold very useful stuff of data recovery. Not only flash drive you can gather lots of information regarding the recovery like hard drive data recovery, recover deleted photos from sd card, smartphone data recovery and much more.  

Here you came across how to use DiskDigger to recover deleted files from flash drive. Whether you may delete some photos from your drive by mistake, or accidentally reformatted the drive entirely.  DiskDigger can usually recover lost files.

STEP-1:

First, plug the USB drive into a USB port on your computer.  Once the drive is plugged in, you can launch DiskDigger, and you should see it in the list of drives available for scanning. Select the drive and click “Next.” most, if not all, photos that you lost.

 

Note: If the USB drive does not appear in the list of drives to scan, make sure it’s inserted properly and click the “Refresh list” button. If the drive still does not appear in the list, try plugging it into a different USB port. And if it still does not appear in the list, it may indicate that the drive has a physical error and may no longer be recoverable.

STEP-2:

DiskDigger will let you choose between the “Dig Deep” and “Dig Deeper” modes. If you want to recover files from flash drive, it recommends you to select Dig Deeper. since this is more likely to recover as many photos as possible.

STEP-3:

This USB data recovery program lets you select the files types that you want to recover files from flash drive. By default, all file types are selected, including photos, so we’ll just click “Next.” (When DiskDigger shows us the list of recoverable files, they will be grouped by file type, and we can ignore other file types besides photos.)


STEP-4:

DiskDigger will now start scanning the USB Drive. As it starts finding deleted files, you’ll see them showing up in the list on the left By clicking on one of the photos it found, you can see a preview of the file on the right. Also, you can switch the list to show thumbnails, so you can see previews of each photo as it’s found. You can do all of this while the program continues to scan the flash drive.

After a little while, the scan will be complete. At this point, you can select the deleted files that you want to recover lost files and save them from the memory card to a different location.

STEP-5:

You can select which files you’d like to recover in the same way you would select multiple files in Windows Explorer: you can click and drag a selection around the files you want to save; you can also hold down the Ctrl key and click on individual files to include them in the selection. If you just want to select all the files, you can right-click within the list, and choose “Select All.”

STEP-6:

When the files are selected, click the “Recover Selected Files” button at the top. This will let you select the new location where the recovered files will be saved. In this example, I’ll simply select the top-most “Desktop” folder on my computer.

Note: Do not save the recoverable files to the same drive as the one you’re recovering from! This risks overwriting some of the very files you’re about to recover.

STEP-7:

DiskDigger will proceed to save the files from the USB drive to the new location:

When it finishes saving, it will automatically open the folder into which the files were saved. This folder will be called “Recovered,” and will be inside the folder that you selected for saving the files. At this point, you can close DiskDigger since the USB flash drive data recovery is complete!

RECOVER DELETED PHOTOS/PICTURES FROM SD CARD| SD CARD DATA RECOVERY

RECOVER DELETED PHOTOS/PICTURES FROM SD CARD| SD CARD DATA RECOVERY

 

Unfortunately, you may lose some memorable moments of your life like photos, videos and etc which are captured in your phone.  So it is the right platform to know how to recover deleted photos from sd card by using data recovery software – Diskdigger. Keep reading to find out everything you need to know about.

Here you’ll come across how to recover images from SD card on your own. The SD card can be either its camera, phone, tab or most other types of removable cards found in today’s devices. SD card data recovery – Diskdigger is an easy tool to recover deleted data from sd card.

STEP-1:

Before you start, make sure to eject the SD card from your device, and do not record any more photos until the recovery process is complete. Any further changes you make to the memory card can diminish the chances to recover deleted pictures/photos from sd card

How to recover photos from a memory card

STEP- 2 :

Remove the sd card and insert it into your computer’s memory card slot. If your computer doesn’t have a slot for the memory card, you can plug the card reader into a USB drive on your computer.

How to recover photos from a memory card

Some cameras or phones can be hooked up directly to your PC with a cable; however, this does not always make the contents of the card visible to DiskDigger. This is why it’s recommended to take the memory card out and plug it directly into your computer.

STEP-3:

Once the memory card is plugged in, you can launch DiskDigger, and you should see the card in the list of drives available for scanning. Select the card and click “Next.”

How to recover photos from a memory card

Note: If the memory card does not appear in the list of drives to scan, make sure it’s inserted properly and click the “Refresh list” button. If the card still does not appear in the list, try plugging it into a different USB port. And if it still does not appear in the list, it may indicate that the card has a physical error and may no longer be recoverable.

STEP-4:

DiskDigger will let you choose between the “Dig Deep” and “Dig Deeper” modes. If you want to recover deleted photos/pictures from sd card, it recommends you to select Dig Deeper. since this is more likely to recover as many photos as possible.

How to recover photos from a memory card

STEP-5:

Now the data recovery software lets you select the files types that you want to recover deleted photos/pictures from sd card. By default, all file types are selected, including photos, so we’ll just click “Next.”

How to recover photos from a memory card

STEP-6:

DiskDigger will now start scanning the sd card. As it starts finding deleted files, you’ll see them showing up in the list on the left. By clicking on one of the photos it found, you can see a preview of the file on the right. Also, you can switch the list to show thumbnails, so you can see previews of each photo as it’s found. You can do all of this while the program continues to scan the card.

How to recover photos from a memory card

STEP-7:

After a little while, the scan will be complete. At this point, you can select the deleted files that you want to retrieve data from sd card and save them from the memory card to a different location.

STEP-8:

You can select which files you’d like to recover in the same way you would select multiple files in Windows Explorer: you can click and drag a selection around the files you want to save; you can also hold down the Ctrl key and click on individual files to include them in the selection. If you just want to select all the files, you can right-click within the list, and choose “Select All.”

How to recover photos from a memory card

When the files are selected, click the “Recover Selected Files” button at the top. This will let you select the new location where the recovered files will be saved. In this example, I’ll simply select the top-most “Desktop” folder on my computer.

Note: Do not save the recoverable files to the same drive as the one you’re recovering from!

How to recover photos from a memory card

STEP-9:

DiskDigger will proceed to save recover deleted files from sd card to the new location:

How to recover photos from a memory card

STEP:10

When it finishes saving, it will automatically open the folder into which the files were saved. This folder will be called “Recovered,” and will be inside the folder that you selected for saving the files. At this point, you can close DiskDigger since the sd card data recovery is complete!

 

 

DiskDigger in Linux

This brief guide explains how to run DiskDigger under the most popular Linux distributions. Since DiskDigger is written for the .NET 4.0 framework, it can run in Linux if you have the Mono package installed. Most flavors of Linux already come with Mono installed, but there are some additional packages that need to be installed that fall under the libmono-system-windows-forms and libmono-system-design packages.

Here are some quick tips for getting DiskDigger up and running in various Linux and Unix distributions:

Ubuntu

Simply install the packages for Windows Forms 4.0 for Mono with the following command:

$ sudo apt-get install libmono-system-windows-forms4* libmono-system-design*

Download DiskDigger, unzip it, and launch it with sudo:

$ wget https://diskdigger.org/diskdigger.zip
$ unzip diskdigger.zip
$
sudo mono DiskDigger.exe

If the above line gives an error, try explicitly specifying the runtime version:

$ sudo mono --runtime=v4.0 DiskDigger.exe

Linux Mint

Install all winforms-related packages:

$ sudo apt-get install libmono-system-windows-forms4* libmono-system-design*

Download DiskDigger, unzip it, and launch it with sudo:

$ wget https://diskdigger.org/diskdigger.zip
$ unzip diskdigger.zip
$
sudo mono DiskDigger.exe

If the above line gives an error, try explicitly specifying the runtime version:

$ sudo mono --runtime=v4.0 DiskDigger.exe

Fedora

Install all winforms-related packages:

$ sudo yum install libmono-system-windows-forms4* libmono-system-design*

Download DiskDigger, unzip it, and launch it with sudo:

$ wget https://diskdigger.org/diskdigger.zip
$ unzip diskdigger.zip
$
sudo mono DiskDigger.exe

If the above line gives an error, try explicitly specifying the runtime version:

$ sudo mono --runtime=v4.0 DiskDigger.exe

OpenSUSE

Install all winforms-related packages:

$ sudo zypper install libmono-system-windows-forms4* libmono-system-design*

In OpenSUSE, I’ve found that launching DiskDigger as a regular user (with sudo) doesn’t work because the root user can’t access the current X-server display. So, you’ll need to log in as root, and launch DiskDigger:

# wget https://diskdigger.org/diskdigger.zip
# unzip diskdigger.zip
#
mono DiskDigger.exe

If the above line gives an error, try explicitly specifying the runtime version:

# mono --runtime=v4.0 DiskDigger.exe

Debian

Install all winforms-related packages:

$ sudo apt-get install libmono-system-windows-forms4* libmono-system-design*

Download DiskDigger, unzip it, and launch it with sudo:

$ wget https://diskdigger.org/diskdigger.zip
$ unzip diskdigger.zip
$
sudo mono DiskDigger.exe

If the above line gives an error, try explicitly specifying the runtime version:

$ sudo mono --runtime=v4.0 DiskDigger.exe

FreeBSD

Log in as root, and install the libgdiplus package (this is assuming that you’ve got xorg, gnome2, and mono installed):

# pkg_add -r libgdiplus

Download DiskDigger, unzip it, and launch it:

# wget https://diskdigger.org/diskdigger.zip
# unzip diskdigger.zip
#
mono DiskDigger.exe

If the above line gives an error, try explicitly specifying the runtime version:

You have to run DiskDigger as a superuser (sudo) because it requires low-level access to your disk(s). If you don’t run it as a superuser, it will not be able to detect or read any of the disks in your system.

Considerations

Here are a few things to keep in mind when running DiskDigger in Linux:

  • It tries to automatically detect the disks in your system by scanning for devices of the form “/dev/sdn“, “/dev/hdn“, and so on. If your disk has a different device mapping, or if you want to scan a particular partition (e.g. “/dev/sda1“), you’ll need to manually enter it in the “Advanced” tab on the main screen of DiskDigger.
  • When you save any recoverable files, they are saved under the root (sudo) user’s permissions. This means that you may need to chmod the permissions on the recovered files to make them accessible to non-sudo users.